| Type | Active subwoofer with twin 8-inch bass drivers and ATL™ bass loading |
|---|
| Drive Unit Complement | LF PMC 200mm (8”) studio 8 driver |
|---|
| Effective ATL™ Length | 3m (9.8ft) |
|---|
| Frequency Response | 25Hz - 500Hz (- 3dB) (@1m full space, on-axis) |
|---|
| Sensitivity | +4dBu input signal = 98dB SPL @ 1m |
|---|
| Max continuous SPL | 115dB @1m
(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) |
|---|
| Max Peak SPL | 121dB @1m
(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) |
|---|
| Input | XLR switchable between analogue & digital AES3
Analogue input
- +20/+24dBu max. input level (selectable)
- 22K ohm input impedance
Digital input
- 16/24-bit AES3 signal, left, right or left + right
- 18 - 192kHz Sample Rate - 110 ohm input impedance
Expansion card slot
- For future connectivity upgrades |
|---|
| Ouput | XLR digital AES3 (fixed 24-bit @ 96kHz) |
|---|
| Network | RJ45 for use with PMC SoundAlign web interface |
|---|
| Features | Level Trim (+/-10dB)
High-pass/Low-pass filter (20 - 200Hz, 12dB/Oct)
Delay (0 - 30mS) Phase (normal or inverted)
LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707)
Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB)
User presets (3 + factory defaults |
|---|
| Latency | 2.4mS |
|---|
| Amplifier Power per Channel | 300Wrms |
|---|
| Mains | 100 - 240VAC auto-switching, 50-60Hz (IEC C14) |
|---|
| Power consumption (idle) | 25W |
|---|
| Power consumption (max) | 300W |
|---|
| Dimensions | H 534mm (21”)
W 551mm (21.7”)
D 440mm (17.3”) |
|---|
| Weight | 37.5kg (82.7lbs) each |
|---|
スタッフコメント