| Input Impedance | 10 Mohms // 22 pF |
|---|
| Gain | Gain Range -oo/+30 dB Gain Peak LED (ch A = RED, B = yellow) +10 dBv Frequency Response +0/-3 dB 20-20.000 Hz |
|---|
| Bass Filter | Type Shelving Gain Range +/- 15 dB @ 40 Hz |
|---|
| Mid Filter | Type Bandpass Filter Gain Range +/- 13 dB Frequency Range 70 – 2500 Hz Q 0.8 |
|---|
| Treble Filter | Type Shelving Gain Range +/- 15 dB @ 10 kHz |
|---|
| HP Filter | Type 12 dB/octave High Pass Frequency Range 20(off) – 450 Hz |
|---|
| Notch Filter | Type Bandpass Notch Frequency Range 70 – 2200 Hz Q 7 Attenuation 7 dB (typically) |
|---|
| Electret Power (Channel A) | 5V, 2mA |
|---|
| Effects Loop | Loop Signal Level -10 dBv (nominal)
Gain Unity (1:1)
Output Impedance 2 kohms
Input Impedance 100 kohms |
|---|
| Phones Out | Recommended Imp. 32 – 200 ohms |
|---|
| Aux Input | Input Impedance 20 kohms
Nominal Level -10 dBv
|
|---|
| Output | Output Impedance 1 kohms
Signal Level 0 dBv (nominal)
|
|---|
| Balanced Output | Output Level -20dBv (nominal)
XLR Connections 1-GND, 2-Hot, 3-Cold Options Gnd Lift, SPKR Sim
|
|---|
| Balanced Input (Channel B) | Input Level -30dBv (nominal)
XLR Connections 1-GND, 2-Hot, 3-Cold
48V Phantom Yes |
|---|
| Auxiliary Info | Power Requirements Idle 500mA @9V
max 800mA @9V (with headphones at max output level)
|
|---|
| Dimensions (WxDxH) | max 168 x 124 x 53 mm / 6.6” x 4.9” x 2.1” |
|---|
| Weight | 660 g (1.5 lbs.) |
|---|
スタッフコメント