| Acoustical operating principle | pressure gradient transducer,
externally polarized |
|---|
| Transducer Ø | 25,4 mm
1 inch |
|---|
| Directional pattern | omni
broad-cardioid
cardioid
super-cardioid
figure-8 and four additional intermediate pattern
selectable on remote control |
|---|
| Frequency range | 20 ... 20.000 Hz |
|---|
| Sensitivity | 23 mV / Pa (-33 dBV), cardioid
20 mV / Pa (-34 dBV), omni
23 mV / Pa (-33 dBV), figure-8 |
|---|
Signal / noise ratio (FET)
Signal / noise ratio (Tube) | 86 dB-A
82 dB-A |
|---|
| Equivalent noise level (FET) | 8 dB-A, cardioid (IEC 61672-1)
9 dB-A, omni (IEC 61672-1)
8 dB-A, figure-8 (IEC 61672-1) |
|---|
| Equivalent noise level (Tube) | 12 dB-A, cardioid (IEC 61672-1)
13 dB-A, omni (IEC 61672-1)
12 dB-A, figure-8 (IEC 61672-1) |
|---|
Dynamic range of FET mic. Amp.
Dynamic range of Tube mic. Amp. | 135 dB-A
128 dB-A |
|---|
| Max. SPL for 0,5 % THD (FET) | 143 dB, 0 dB pre-attenuation
149 dB, 6 dB pre-attenuation
155 dB, 12 dB pre-attenuation
161 dB, 18 dB pre-attenuation |
|---|
| Max. SPL for 0,5% THD (Tube) | 140 dB, 0 dB pre-attenuation
146 dB, 6 dB pre-attenuation
152 dB, 12 dB pre-attenuation
158 dB, 18 dB pre-attenuation |
|---|
| Pre-attenuation pad | 6 dB
12 dB
18 dB
selectable on remote control |
|---|
| Connector | gold plated 11-pin XLR |
|---|
| Cable | 8 m (26 ft)
11-pin audio cable
oxygen-free copper |
|---|
| Dimensions (Mic) | 192 x 60 x 46 mm
7,5 x 2,4 x 1,8 inch |
|---|
| Dimensions (PSU) | 250 x 150 x 70 mm
9,8 x 5,9 x 2,8 inch |
|---|
| Net weight (Mic) | 662 g
23,3 oz |
|---|
| Net weight (PSU) | 1930 g
68,1 oz |
|---|
スタッフコメント