*予定納期について:お取り寄せ商品の予定納期は、おおよその目安として表記しております。出来る限り最新の情報を掲載しておりますが、メーカーの在庫状況によってはお届けまでお時間を頂く場合もございます。ご了承ください。
主な特徴
・アクティブ・ピックアップ搭載の楽器に最適
・極めてクリアーな音質のアクティブDI
・クラスを凌駕する高いダイナミック・レンジとヘッドルーム
・48Vファントム電源を有効活用するデジタル・スイッチング機能
・コンパクト・ボディ
・スイッチ類を保護するブックカバー・デザイン
製品紹介
近年のプレイヤーの多くが使用する高出力楽器(アクティブ・ピックアップ、プリアンプ搭載楽器など)にも対応したアクティブDIです。
スイッチング・パワー・サプライ機能を搭載しています。
それにより、20Hz~100kHzまでと、幅広い周波数帯を原音に忠実なレスポンスと、高いヘッドルームを実現しました。
楽器本来の音が損なわれずナチュラルで透明なサウンドが可能です。
ヘッドルームが高いので、アクティブ・ピックアップを搭載した楽器に最適です。
ボディは、14ゲージ・スチール製。
スイッチ類を保護するブックエンド・デザインを採用。
コンパクトながら過酷なロードに耐える耐久性を持ち、トラブル無くお使いいただけます。
技術仕様 | |
---|---|
Specifications | ・Specifications are subject to change without notice. ・Audio circuit type: Proprietary analog circuit with low-noise op-amp ・Frequency response: 20Hz ~ 20kHz (± 1.5 dB) ・Signal to noise ratio: ・Dynamic range: 99dB ・Noise floor: -82dB below 0dBu ・Equivalent input noise: -86dBu ・Maximum input: +9dBu ・Phase deviation: +28º at 20Hz | +1º at 1kHz | -2º at 20kHz ・Total harmonic distortion: 0.001% @ 0 dBu ・Inter-modulation distortion: 0.002% @ 0 dBu ・Input impedance: 220kΩ - ¼" input ・Output impedance: 600Ω - XLR output |
Features | ・Input pad: -15dB ・Ground lift: Disconnects pin-1 at XLR output ・XLR configuration: AES standard (pin-2 hot) |
General | ・Power: 48V phantom - proprietary digital switching ・Construction: 14 gauge steel chassis and outer shell ・Finish: Durable powder coat ・Size: (W x H x D) Size: 2.75" x 4.25" x 1.75" (70 x 108 x 44mm) ・Weight: 1.2 lb (544 g) ・FCC approval: Complies with section 15 of the FCC Rules ・Conditions: For use in dry locations only between 5°C and 40°C |